Fits GE - Hotpoint & Kenmore 363 Refrigerators.
Easily Twist to Remove & Replace.
Interior - Vertical - Rear Mount.
Free S&H 4 Or More!
Compatible MWFP Water Filter Replacement
Located Inside the Refrigerator at the Rear Wall - Mounted Vertically.
Easily Twist to Remove and Install.
Replaces Part Numbers: WR97X10018, WR97X10006, WR2X11290, WR2X11287, WR2X11020, WR2M3552, WR02X11290, WR02X11287, WR02X11020, WR02X11020, WR02M3552, WF, HXRT, HWF, GWF06, GWF01, GWF, FXRT, MXRC, 9905, 46-9905, MWF, AP3859302, AP5788185, EAP8746144, PS8746144, MWF2PAK, Aqua Fresh WF287.
Compatible GE MWFP Replacement
ADVANCED FILTRATION TECHNOLOGY
This WaterSentinel® refrigerator water filter contains a compressed carbon block which provides tremendous capacity to remove and/or reduce impurities and sediment that may be present in your drinking water.
This economical filter will provide you with fresh and clean tasting water and ice cubes and is Guaranteed by WaterSentinel®.
FILTER FEATURES:
Economical alternative to expensive substitutes.
Delivers clean, clear water that looks and tastes great.
Will remove or reduce chlorine taste and odor that may be present in your drinking water.
Designed to provide up to six months of life or 300 gallons.
Does not remove minerals which may be beneficial to health.
Flow Rate: .5 gpm/1.89 lpm
Operating Temperature: 33 - 100°F
Min Operating Pressure: 30 psi
Max Operating Pressure: 100 psi
Measurements Approx. 5 1/2 inches Tall x 3 1/8 inches Wide.
This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.
This filter has been tested by the manufacturer against ANSI/NSF Standard 42 for the reduction of chlorine taste and odor.
The WSG-1 MWFP is found for the following models.
Installation Instructions
Resetting Your Filter Change Indicator
Press and hold the 'Reset Filter' button on the dispenser for 3 seconds.
