Removing and Replacing an Amana Water Filter

Amana makes two refrigerator water filters. Find either 'Interior Upper Right Rear Corner' or 'Interior At The Ceiling In A Flip Down Tray' below to learn how to remove and replace your Amana water filter yourself. Amana Refrigerator Filter Category

Amana WF401 Water Filter Clean n' Clear

Inside at the Upper Right Rear Corner

Installation Instructions

  1. Locate the filter inside the refrigerator at the right rear in a vertical posititon.
  2. Twist the old filter counterclockwise until it is free.
  3. Remove the filter straight down and discard (the water will shut off automatically).
  4. Push the new filter into the fridge and Twist clockwise until it is fully in place.
  5. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  6. That's how easy it is to replace the WF401 water filter.
  7. Reset your 'change filter' light (if your fridge has one).

 

Amana UKF8001 Water Filter PuriCleanII

Inside At The Ceiling In A Flip Down Tray

Installation Instructions

  1. Locate the filter in a flip down compartment at the upper right ceiling of the refrigerator and Unlatch the plastic filter cover. Let it swing down (so you can see the filter).
  2. While pushing in, Twist the old filter counterclockwise until it is free.
  3. Slide the filter straight out and discard (the water will shut off automatically).
  4. Push the new filter into the fridge and Twist clockwise until it is fully in place.
  5. Push the plastic filter cover up until it snaps closed.
  6. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  7. That's how easy it is to replace the UKF8001 water filter.
  8. Reset your 'change filter' light (if your fridge has one).