Removing and Replacing a Frigidaire Water Filter

Frigidaire makes four refrigerator water filters. Find either 'Interior Upper Right Rear Corner Inside a Filter Cup', 'Interior Upper Right Front' or 'Interior Upper Right Rear Corner' below to learn how to remove and replace your Frigidaire water filter yourself. Frigidaire Refrigerator Filter Category

Frigidaire WF2CB Water Filter PureSource2

Inside at the Upper Right Front

Installation Instructions

  1. Locate Filter inside fridge at upper front, Press the button to the right of the filter to release it.
  2. Pull the old filter straight out and discard (the water will shut off automatically).
  3. Push the new filter in VERY FIRMLY until you hear it 'CLICK' into place.
  4. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  5. That's how easy it is to replace the PureSource2 water filter.
  6. Reset your 'change filter' light (if your fridge has one).

 

Frigidaire WFCB Water Filter PureSource Plus

Inside at the Upper Right Rear Corner Inside a Filter Cup

Installation Instructions

  1. Locate Filter Cup inside fridge at right upper rear wall.
  2. Remove upper shelf for more room if needed.
  3. Unscrew the filter cup and dump out the water.
  4. Pull the old filter straight down and discard.
  5. Place the new filter in the filter cup.
  6. The end of the filter with the small o-ring should be up.
  7. Screw the filter cup (with filter) up onto the housing.
  8. The filter should self-align as the cup is tightened.
  9. Replace shelf (if removed).
  10. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  11. That's how easy it is to replace the PureSource Plus water filter.
  12. Reset your 'change filter' light (if your fridge has one).

 

Frigidaire WF1CB Water Filter PureSource

Inside at the Upper Right Rear Corner Inside a Filter Cup

Installation Instructions

  1. Locate Filter Cup inside fridge at right upper rear wall.
  2. Remove upper shelf for more room if needed.
  3. Unscrew the filter cup and dump out the water.
  4. Pull the old filter straight down and discard.
  5. Place the new filter in the filter cup.
  6. The end of the filter with the small o-ring should be up.
  7. Screw the filter cup (with filter) up onto the housing.
  8. The filter should self-align as the cup is tightened.
  9. Replace shelf (if removed).
  10. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  11. That's how easy it is to replace the PureSource water filter.
  12. Reset your 'change filter' light (if your fridge has one).

 

Frigidaire WF3CB Water Filter PureSource3

Inside at the Upper Right Rear Corner

Installation Instructions

  1. Remove the old filter by pushing (and letting go) on the end (Face) of the filter.
  2. Slide out the old filter and insert the new filter and push firmly till the new filter snaps into place.
  3. When you hear it click (It is locked into place).
  4. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  5. That's how easy it is to replace the PureSource3 water filter.
  6. Reset your 'change filter' light (if your fridge has one).

 

Frigidaire Ultra Water Filter ULTRAWF

Inside at the Upper Right Rear Corner

Installation Instructions

  1. Remove the old filter by pushing (and letting go) on the end (Face) of the filter.
  2. Slide out the old filter and insert the new filter and push firmly till the new filter snaps into place.
  3. When you hear it click (It is locked into place).
  4. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  5. That's how easy it is to replace the ULTRA water filter.
  6. Reset your 'change filter' light (if your fridge has one).