Removing and Replacing a Samsung Water Filter

Samsung makes two refrigerator water filters. Find either 'Interior Upper Right Rear Corner' or 'Interior Between Lower Crisper Drawers' below to learn how to remove and replace your Samsung water filter yourself. Samsung Refrigerator Filter Category

SAMSUNG DA29-00003G WATER FILTER

Inside at the Upper Right Rear Corner

Installation Instructions

  1. Locate the existing filter and Twist a quarter-turn counterclockwise.
  2. Pull the filter straight down and discard (The water will shut off automatically).
  3. Push the new filter up into the fridge until it stops.
  4. Twist the filter a quarter-turn clockwise until Tight.
  5. Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
  6. Flush 2 - 3 gallons of water from water dispenser. Some noise and spurting is common as air is purged from the system.
  7. That's how easy it is to replace the DA29-00003G Water Filter.
  8. Reset your 'change filter' light (if your fridge has one).

 

SAMSUNG DA29-00020B WATER FILTER

Inside Between Lower Crisper Drawers

Installation Instructions

  1. Locate existing filter and remove it by turning it counter clockwise a quarter-turn and Pull the filter straight out (the water will shut off automatically).
  2. Push the new filter into the fridge until it stops.
  3. Twist the filter a quarter-turn clockwise until Tight.
  4. Flush 2 - 3 gallons of water from water dispenser. Some noise and spurting is common as air is purged from the system.
  5. That's how easy it is to replace the DA29-00020B Water Filter.
  6. Reset your 'change filter' light (if your fridge has one).