W10757851 Ice Level Optics Boards 4389102

 

Installing the Whirlpool W10757851 Ice Level Optics Board 4389102

Let’s get into some simple steps of installing your Ice Maker Optics Board Kit. Read on.

  • Disconnect the power supply to the refrigerator by unplugging the power plug, or by turning designated circuit breaker off at the fuse panel.
  • Remove the screws from the emitter cover on the right side and remove.
  • Now disconnect the wire harness and remove the screws accordingly in order to release the emitter control board from the slot.
  • Now install the new emiter board by connecting the wire harness & screw the new emitter board into place.
  • Replace cover and leave switch in the off position.
  • Next carefully remove the screws from the receiver cover on the left side and remove.
  • Now disconnect the wire harness and remove the screws accordingly in order to release the receiver control board from the slot.
  • Now install the new receiver board by connecting the wire harness & screw the new receiver board into place and replace cover.
  • It's now time to turn your power back on to the refrigerator.
  • Slide ice maker switch to the on position.

Follow such simple steps of installation and you can really do it yourself. Now sit back and in a few hours you can enjoy your favorite drink with some refreshing ice.