Whirlpool Ice Makers

FREE S&H THIS ITEM
Brand New Bare Replacement Ice Maker requires you to use parts off your old refrigerator ice maker. The ice maker cover, wire shut-off arm, mounting bracket and electrical wire harness. Replacing the cover requires a simple pull on the cover to pop it off the old ice maker and then simply push it on to the new ice maker. Replacing the wire harness you simply depress the plastic tab where it plugs into the side of the ice maker and simply push the harness into the new ice maker. The wire shut-off arm pulls out of the front of the ice maker and also pulls out of the rear water fill cup on the rear of the ice maker and pushes into their respective spots on the new ice maker. This is an OEM (Original Equipment Manufacturer) part which comes well packed in a cardboard box.
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.
Ice maker leaking water.

FREE S&H THIS ITEM
This OEM Upper Front Mount Ice Maker is for 20cf - 23cf models and produces 5-cubes per batch and has a specially designed Ice Stripper that allows the ice to slide from the ice maker into the vertical ice container that is located directly in the freezer door. This ice maker is controlled by an 'optic led sensor' that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the icemaker). When the ice level in the container is below the led beam (Low of Ice) it (turns on the icemaker). Be sure to correctly diagnose before purchasing. Here are the 4 things to check! (Freezer temp. approx. 0℉ to 5℉) - (ice level optics board) - (water inlet valve) - (ice maker). When replacing you will have to re-use the bottom mounting tray.
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.
Ice maker leaking water.

FREE S&H THIS ITEM
This New Ice Level Optics Board Kit is for all models that have the vertical ice container in the freezer door! The ice maker is controlled by this 'Optics Board Kit' that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). If the ice level control board fails, the ice maker will stop making ice. Be sure to correctly diagnose before purchasing. Here are the 4 things to check! (Freezer temp. approx. 0℉ to 5℉) - (ice level optics board) - (water inlet valve) - (ice maker).
Ice Level Optics Board Diagnostic: ----> CLICK HERE
Includes The Emitter & Receiver Board.
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.

This Reach-In Style Ice Cube Bucket is the most popular for Models that have the ice maker only feature with no ice dispenser thru door. This bucket is a Reach In Type and comes in a variety of ice maker kits used for freezer on top, side by side and freezer on bottom model refrigerators.
Easy to replace
No tools needed.

FREE S&H THIS ITEM
This New OEM Upper Front Mount Ice Maker produces 8-cubes per batch and is for 36" wide - 48" wide built-in model refrigerators. This style ice maker has a specially designed Ice Stripper that allows the ice to slide from the ice maker into the ice container that is located directly in the freezer door. It is controlled by an 'optic led sensor' that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). Before purchasing, here are the 4 things to diagnose! (Freezer temp. approx. 0℉ to 5℉) - (ice level optics board) - (water inlet valve) - (ice maker). When replacing you will have to re-use the bottom mounting tray.
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.
Ice maker leaking water.

FREE S&H THIS ITEM
Brand New Replacement Ice Maker Assembly is an original equipment manufacturer (OEM) part and an approved replacement ice maker for your refrigerator. Includes Ice Maker, 4 wire 8 terminal Wiring Harness, Wire Shut Off Arm and Reach-In Ice Bucket.
Be sure to correctly diagnose before purchasing - See Ice Maker Repair Tips ----> Click Here

• Used to repair the following Symptons:
• Ice maker not making ice.
• Ice maker produces too little ice.
• Ice maker produces too much ice.
• Note: These are intended as a guideline only, as other items can cause the same symptoms.

FREE S&H THIS ITEM
Bottom Mount Ice Maker Assembly produces 8-cubes per batch and is an original equipment manufacturer (OEM) part that fits some bottom-freezer refrigerators. This is an ice maker Kit that includes: (2 module covers) (2 wire harnesses) (1 ice maker) (1 shut-off arm) and instructions. The ice maker has a different part number on it's sticker because this is now a kit. Be sure to correctly diagnose before purchasing. Here are the 3 things to check! (Freezer temp. approx. 0℉ to 5℉) - (water inlet valve) - (ice maker).
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.
Ice maker leaking water.

FREE S&H THIS ITEM
This Brand New Freezer On Bottom Ice Maker is an original equipment manufacturer (OEM) part that produces 8-cubes per batch and fits bottom-freezer refrigerators. This complete ice maker is an assembly that includes the ice mold with heater, module control device, wire harness and shut off arm. Be sure to correctly diagnose before purchasing. Here are the 3 things to check! (Freezer temp. approx. 0℉ to 5℉) - (water inlet valve) - (ice maker).
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.
Ice maker leaking water.

FREE S&H THIS ITEM
Replacement OEM 8-Cube Upper Front Mount Ice Maker is for certain side by side refrigerator models and produces 8-cubes per batch. This style ice maker has a specially designed Ice Stripper that allows the ice to slide from the ice maker into the ice container that is located directly in the freezer door. It is controlled by an 'optic led sensor' that scans the level of ice in the ice container. When the ice level in the container blocks the led beam (Full of Ice) it (shuts off the ice maker). When the ice level in the container is below the led beam (Low Ice) it (turns on the ice maker). Before purchasing, here are the 4 things to diagnose! (Freezer temp. approx. 0℉ to 5℉) - (ice level optics board) - (water inlet valve) - (ice maker). When replacing you will have to re-use the bottom mounting tray.
Used to repair the following Symptons:
Ice maker not making ice.
Ice maker dispenses too little ice.
Ice maker dispenses too much ice.
Ice maker leaking water.