**FREE SHIPPING OVER $59** **SAVE 5% PER ORDER WITH SIGNUP!**

Browse Products

Replacing EveryDrop Water Filters

EveryDrop Brand for Whirlpool has three locations for their refrigerator water filters. Find either '1/4 turn base grill', 'Push button base grill' or 'Interior upper right corner' below to learn how to remove and replace your Whirlpool water filter yourself.

EDR1RXD1 Refrigerator Ice & Water Filter 1 W10295370A

Two Locations

(1) Located Inside the Fridge at the Upper Right

Installation Instructions

  1. Locate filter compartment at the right upper corner inside the refrigerator.
  2. You might have to remove the upper shelf for more room.
  3. Gently lift up on filter cover and filter will automatically slide out.
  4. Slide old filter all the way out, noticing the arrow on the end is facing up. (the water will shut off automatically).
  5. Discard the old filter.
  6. Line the arrow on end of the new filter upward.
  7. Gently Push the new filter into the fridge with arrow facing up till it stops.
  8. As you close the filter cover you will notice that the filter will go in and lock into place.
  9. Reinstall Shelf (if taken out).
  10. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  11. That's how easy it is to replace the EDR1RXD1 water filter.
  12. Reset your 'change filter' light (if your fridge has one).

 

(2) Located Thru Lower Front Grill

Installation Instructions

  1. Locate filter at the lower front grill of refrigerator.
  2. Gently lift up on filter cover and filter will automatically slide out.
  3. Slide old filter all the way out, noticing the arrow on the end is facing up. (the water will shut off automatically)
  4. Discard the old filter.
  5. Line the arrow on end of the new filter upward & Gently Push the new filter into the fridge with arrow facing up till it stops.
  6. As you close the filter cover you will notice that the filter will go in and lock into place.
  7. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  8. That's how easy it is to replace the EDR1RXD1 water filter.
  9. Reset your 'change filter' light (if your fridge has one).
  10. PRODUCT PAGE

 

EDR2RXD1 Refrigerator Ice & Water Filter 2 W10413645A

Located Inside the Fridge at the Upper Right

Installation Instructions

  1. Locate filter compartment at the top inside the refrigerator.
  2. You might have to remove the upper shelf for more room.
  3. Push on the filter cover to open filter compartment.
  4. The filter will drop down and to remove you will push in and turn counterclockwise until it is out. (the water will shut off automatically).
  5. Discard the old filter.
  6. Line the knotch on end of the new filter upward.
  7. Push the new filter into the fridge with knotch facing up and push filter while twisting clockwise till it locks into place.
  8. Push filter upward till it locks in the compartment and close the cover.
  9. Re-install Shelf (if taken out).
  10. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  11. That's how easy it is to replace the EDR2RXD1 water filter.
  12. Reset your 'change filter' light (if your fridge has one).
  13. PRODUCT PAGE

 

EDR3RXD1 Refrigerator Ice & Water Filter 3 4396841

Push Button Filter Thru Lower Front Grill

Installation Instructions

  1. Locate Filter at bottom grille and Press the button to the left of the filter to release it.
  2. Pull the filter straight out (the water will shut off automatically).
  3. Remove the reusable color-keyed cap from the end.
  4. Discard the old filter.
  5. Twist the cap onto the end of the new filter.
  6. Push the new filter straight in until it 'Clicks' into place.
  7. Note: To install filter push until you hear the receiver click into place. Improper installation may cause leaks, damage to flooring and appliances.
  8. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  9. That's how easy it is to replace the EDR3RXD1 water filter.
  10. Reset your 'change filter' light (if your fridge has one).
  11. PRODUCT PAGE

 

EDR4RXD1 Refrigerator Ice & Water Filter 4 UKF8001

Inside At The Ceiling In A Flip Down Tray

Installation Instructions

  1. Locate the filter in a flip down compartment at the upper right ceiling of the refrigerator and Unlatch the plastic filter cover. Let it swing down (so you can see the filter).
  2. While pushing in, Twist the old filter counterclockwise until it is free.
  3. Slide the filter straight out and discard (the water will shut off automatically).
  4. Push the new filter into the fridge and Twist clockwise until it is fully in place.
  5. Push the plastic filter cover up until it snaps closed.
  6. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  7. That's how easy it is to replace the EDR4RXD1 water filter.
  8. Reset your 'change filter' light (if your fridge has one).

 

EDR5RXD1 Refrigerator Ice & Water Filter 5 4396508

1/4 Turn Filter Thru Lower Front Grill

Installation Instructions

  1. Locate Filter at bottom grille and Twist the old filter a quarter-turn counterclockwise.
  2. Pull the filter straight out (the water will shut off automatically).
  3. Remove the reusable color-keyed cap from the end.
  4. Discard the old filter.
  5. Slide the cap onto the end of the new filter.
  6. Push the new filter into the fridge until it stops.
  7. Twist the filter a quarter-turn clockwise.
  8. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  9. That's how easy it is to replace the EDR5RXD1 water filter.
  10. Reset your 'change filter' light (if your fridge has one).
  11. PRODUCT PAGE

 

EDR6D1 Refrigerator Ice & Water Filter 6 4396701

1/4 Turn Filter Thru Lower Front Grill

Installation Instructions

  1. Locate Filter at bottom grille and Twist the old filter a quarter-turn counterclockwise.
  2. Pull the filter straight out (the water will shut off automatically).
  3. Remove the reusable color-keyed cap from the end.
  4. Discard the old filter.
  5. Slide the cap onto the end of the new filter.
  6. Push the new filter into the fridge until it stops.
  7. Twist the filter a quarter-turn clockwise.
  8. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  9. That's how easy it is to replace the EDR6D1 water filter.
  10. Reset your 'change filter' light (if your fridge has one).
  11. PRODUCT PAGE

 

EDR7D1 Refrigerator Ice & Water Filter 7 UKF7003

Located Inside the Fridge at the Upper Right

Installation Instructions

  1. Twist the old filter a quarter-turn counterclockwise.
  2. Pull the filter straight down and discard (the water will shut off automatically).
  3. Push the new filter up into the fridge until it stops.
  4. Twist the filter a quarter-turn clockwise.
  5. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  6. That's how easy it is to replace the EDR7D1 water filter.
  7. Reset your 'change filter' light (if your fridge has one).
  8. PRODUCT PAGE

 

EDR8D1 Refrigerator Ice & Water Filter 8 8171413

Located Inside the Fridge at the Upper Right

Installation Instructions

  1. Twist the old filter a quarter-turn counterclockwise.
  2. Pull the filter straight down and discard (the water will shut off automatically).
  3. Push the new filter up into the fridge until it stops.
  4. Twist the filter a quarter-turn clockwise.
  5. Flush 1 - 2 Gallons of Water to Purge Out Air From System.
  6. That's how easy it is to replace the EDR8D1 water filter.
  7. Reset your 'change filter' light (if your fridge has one).
  8. PRODUCT PAGE

 


© 2000 - 2020 Water Filter Mart - All Rights Reserved.